3mm, 5.5mm, 8mm, 12mm, 16mm, 16.75mm, 18mm and 25mm (Plain & Prelam).

8 ft × 4 ft and 10 ft × 4 ft.

More than 170+ shades in European décor papers.

They are moisture resistant but not recommended for continuous outdoor exposure. For exterior use, dedicated exterior boards like Boilo boards are preferred.

Store flat in a dry area, off the ground, and covered. Avoid moisture exposure and rough handling to protect edges.

HDHMR is denser, more moisture resistant, has higher screw holding strength, and better routing performance than MDF.

HDHMR has uniform density, no core gaps, smoother routing finish, and consistent strength, while plywood has layer-based construction and possible voids.

Plain boards require surface finishing after installation, while Prelam boards come factory laminated and are ready to use.

Yes, it is highly suitable due to moisture resistance and screw holding strength.

Yes, it is widely used for door shutters and door cores.

Yes, its compact core gives clean routing and carving without splintering.

Plain HDHMR requires lamination or finishing. Prelam HDHMR does not.

Yes, edge banding is recommended for protection and finish.

Laminates, veneers, acrylic sheets, PVC laminates, PU paint, and polish finishes.

Yes, it has excellent screw holding capacity, especially in the core.

Yes, its smooth dense surface supports paint and PU coating well.

Yes, it is ideal for wardrobes, cabinets, and storage units.

Yes, they are truth-calibrated and dimensionally stable.

It has low swelling compared to MDF and particle board but should not face prolonged water exposure.

Yes, they are treated against termite and borer attacks.

It is a protective technology that helps kill up to 99% of viruses, bacteria, and microbes on the surface.

Yes, they are manufactured under environmental compliance standards.

Yes, it is suitable for interior partitions and paneling.

Yes, it is widely used in offices, retail, hospitals, and institutions.

Yes, factory calibration ensures uniform thickness and smoothness.

It performs better than MDF and particle board due to higher moisture resistance.

Yes, it is used where strong panels are required for packing and industrial use.

Yes, up to 15 years warranty against manufacturing defects as per company terms.