Seamless Installation: Expert Tips for Working with GLOSS MEISTER Surfaces

Technology and innovation have left no aspect of life and living untouched, including the interior design raw material industry. Today, there is a wide variety of source material available to bring your interior design ideas to life.

One such highly popular product is the GLOSSY BOARD, also available under specific brand names like GLOSS MEISTER. In this blog, we share technical details and expert tips for working with glossy surfaces, with reference to Acrylic High Gloss Boards.

What is a GLOSSY BOARD?

A Glossy Board is a type of engineered wood panel, usually made from MDF (medium-density fiberboard), with a high-gloss reflective surface finish. This finish is achieved through UV (ultraviolet) curing, where a special coating is hardened using UV light.

Glossy boards are widely used in interior design and furniture due to their smooth finish and premium appearance.

About Acrylic High Gloss MDF Boards

Acrylic High Gloss MDF Boards combine the look of solid acrylic with ultra-high gloss surfaces, offering modern designs and finishes.

• Mirror-like surface quality
• Easy to clean with a soft wet cloth
• Available in 19 designer shades
• Suitable for multiple interior applications

Application Areas:

• Wall decoration
• Cabinets and wardrobes
• Kitchen shutters
• Bedroom and living room furniture
• Multipurpose interior applications

Technical Details & Instruction Manual

Cutting Equipment:

Use a Panel Saw with a primary cutting blade and a secondary scoring blade. The cutting motor should run between 5500–7000 RPM.

Primary Cutting Blade Specification:

72 teeth with PCD/TCD tip.

Feed Rate:

Maintain a steady feed rate of 18 ft per minute to ensure smooth cutting without chipping.

Panel Saw Preparation:

• Ensure proper alignment of blades for a 90° cut
• Check blade sharpness
• Keep cutting table clean and dust-free

Critical Points:

• Do not remove BOPP protective film during fabrication
• Clean surface only after film removal using a mild cleaner

Best Cutting Process:

• Place board with BOPP film on cutting tray
• Ensure glossy side faces the scoring saw
• Align board properly with guide
• Set blade speed to 7000 RPM (min. 5500 RPM)
• Maintain constant feed rate

Ensure the dust collector is ON and use protective gloves and safety glasses.

Technical Specifications

• Core Panel: Pre Laminated MDF
• Grade: Exterior Grade (BWR – Water Resistant)
• BIS Standard: IS 14587
• Size: 8 ft x 4 ft (2440mm x 1220mm)
• Thickness: 18mm
• Finish: High Gloss
• Shades: 19 colors

Product Features

• High gloss level (>110° reflection)
• Rich color depth
• High surface hardness (≥ 2H)
• Scratch resistant
• Anti-bacterial, anti-acid, anti-alkali
• Fade resistant
• High moisture resistance

Edge Finishing

• PVC High Gloss Edge Band Tape (150m rolls)
• Applicable using through-feed machines
• Alternative: Aluminium profiles with grooves

Important Notes:

• Best suited for vertical applications
• Align arrow marks in same direction during installation
• Remove protective film only after installation is complete

Conclusion

Glossy Boards, especially Acrylic High Gloss MDF Boards, offer a perfect combination of aesthetics and durability. By following proper handling and installation techniques, you can achieve a premium finish in your interiors.

For expert guidance, visit: https://www.actiontesa.com/contact